What is the cleaning method for plate filters
pageview:12
2024.09.25
Basic cleaning steps
Remove the filter:
Open the suction grille in the device and gently pull down by holding down the buttons on both sides.
Hold the hook on the air filter and pull out the device diagonally downwards.
Preliminary dust removal:
Use a device similar to a vacuum cleaner to remove dust from the filter, which is suitable for situations with less dust and shorter accumulation time.
If there is a lot of dust, you can first gently tap the filter or use a vacuum cleaner to remove most of the dust on the surface.
Deep cleaning:
For filters with severe dust accumulation, they can be rinsed with warm water. The water temperature should be controlled below 45 ℃ to avoid damage to the filter.
Use a soft brush (such as a soft bristled brush) dipped in neutral detergent for brushing, be careful not to use hard brushes or sharp objects to avoid damaging the filter plate.
After cleaning, rinse off any detergent residue with clean water, and then let it air dry naturally in a cool place, avoiding direct sunlight or high temperature baking.