Installation method of stainless steel folding coal machine filter element

pageview:8 2025.02.28

The installation method of stainless steel folding coal machine filter element needs to strictly follow the operating specifications to ensure its filtration effect and service life. Firstly, a comprehensive inspection of the filter element and filtration equipment must be conducted before installation. Confirm that the specifications and model of the filter element match the filtering equipment, and check whether the surface of the filter element is damaged or deformed. At the same time, clean the inside of the filter cartridge or housing of the filtration equipment to ensure that there are no residual impurities or dirt, so as not to affect the installation and operation of the filter element. When installing, gently place the filter element into the filter cartridge, paying attention to the direction of the inlet and outlet of the filter element (usually indicated by arrows), ensuring that the sealing ring of the filter element is completely in contact with the contact surface of the filter cartridge, to avoid leakage or decreased filtration effect due to improper installation.

Secondly, when fixing the filter element, it is necessary to operate according to the specific design. If the filter element is fixed with a buckle, align the filter element with the slot and gently press it to ensure that it is firmly fixed; If the filter element is connected by threads, it needs to be tightened in a clockwise direction, but pay attention to moderate force to avoid excessive tightening that may cause deformation of the filter element or damage to the sealing ring. After installation, a sealing test is required. Introduce low-pressure liquid or gas and check for any leakage at the connection between the filter element and the filter cartridge. If a leak is found, the filter element position needs to be readjusted or the sealing ring needs to be replaced until it is completely sealed.
Finally, after confirming that the sealing is correct, gradually increase the pressure to the normal working state and observe the operation of the filter element. During the installation process, it is necessary to avoid using sharp tools or applying excessive force to avoid damaging the folding structure or surface coating of the filter element. In addition, regularly check the installation status and filtration effect of the filter element, clean or replace the filter element in a timely manner, and ensure its long-term stable operation. The correct installation method can not only improve filtration efficiency, but also extend the service life of the filter element and reduce equipment maintenance costs.