Installation position and function of hydraulic filter

pageview:58 2023.10.16

The installation direction of the hydraulic filter and the installation direction of the filter need to be confirmed. The structure and performance of both ends are different and cannot be mixed. If the installation direction is reversed, it will cause damage to the internal structure and other equipment, and the filter element and other equipment may be directly damaged. So, what are the installation positions and functions of hydraulic filters that everyone knows?
The installation position and function of the hydraulic filter are as follows:
1. Installed on the suction pipeline of the hydraulic pump:
Usually, coarse hydraulic filters, such as mesh hydraulic filters, are used to maintain the pump and the entire hydraulic system.
2. Installed on the pressure oil pipeline of the hydraulic pump:
Usually, semen pressure filters are used to maintain hydraulic components other than hydraulic pumps. To prevent hydraulic filter blockage from causing pump overload or filter element damage, a safety valve or blockage alarm can be connected in parallel.
3. Installed on fragmented oil return roads:
RFA direct return hydraulic filter can be used to circulate and remove local impurities in the oil. To prevent accidents caused by hydraulic filter blockage, a safety valve or blockage alarm should also be connected in parallel.
The installation position and function of hydraulic filters are mainly introduced above, and we should all operate according to the above installation position and function.