What is the fault of the hydraulic return oil filter often clogging

pageview:54 2023.10.24

         The function of the hydraulic return oil filter is to filter out various impurities in the hydraulic system. The main source of the hydraulic return oil filter is mechanical impurities that remain in the hydraulic system after cleaning. Sometimes, hydraulic return oil filters may also have some malfunction problems. What is the reason for the frequent blockage of the hydraulic return oil filter?
         The leakage of the hydraulic return oil filter is mainly caused by the failure of the sealing components. There are multiple reasons for seal failure:
         In practical applications, improper installation of hydraulic return oil filters is the main cause of seal failure. Forcible pressing during assembly can cause cutting and damage to the sealing element, reverse installation of directional sealing elements, and extrusion and twisting of O-rings, all of which can cause sealing element failure. At the same time, special attention should be paid to the cleanliness of the sealing surface when installing the seal
        The reason for the hydraulic return oil filter is: 1. The oil is too dirty; 2. The filtering accuracy of the selection is too low.
        The above is the reason why the hydraulic return oil filter is often clogged and malfunctioning, shared with you by DFFILTRI filtration company. We hope it can be helpful to you. If you have any questions about the filter or filter element, please feel free to contact us. We are available 24/7 and look forward to your call!!!