Installation method of TF series oil suction filter

pageview:11 2024.09.29

 
The installation method of the TF series oil suction filter is relatively simple and flexible. It can be mainly installed on the side, upper or bottom of the fuel tank. The specific installation method is as follows:
Location selection: Choose a suitable installation location based on the layout of the hydraulic system and the design of the oil tank. The TF series oil suction filter is usually installed at the oil suction port of the oil pump to protect the oil pump and other hydraulic components from contamination and impurities.
Fixed installation: Use appropriate fasteners and mounting brackets to secure the filter in the selected position. Ensure that the filter is stable and not easily shaken to prevent unnecessary vibration and noise during operation.
Installation of oil suction cylinder: Immerse the oil suction cylinder below the liquid level in the oil tank to ensure that the filter can effectively suck in oil. At the same time, the filter head should be exposed outside the fuel tank for easy maintenance and replacement of the filter element.
Connecting pipelines: According to the design of the filter, connect the inlet and outlet ports to the pipelines of the hydraulic system. TF series oil suction filters usually offer two connection methods: tubular and flange, and users can choose the appropriate connection method according to their actual needs. During the connection process, attention should be paid to sealing to prevent oil leakage.
Install self sealing valve, bypass valve, and transmitter: The TF series oil suction filter is also equipped with self sealing valve, bypass valve, and filter element pollution blockage transmitter and other devices. The installation of these devices should be carried out in accordance with the product manual or relevant drawings to ensure that they function properly and are easy to operate. The self sealing valve can automatically close when replacing or cleaning the filter element, preventing the oil from flowing out of the tank; The bypass valve can automatically open when the filter element is clogged, avoiding the oil pump from being emptied; The transmitter can send a signal when the filter element is contaminated to a certain extent, reminding the user to replace or clean the filter element in a timely manner.
Inspection and commissioning: After installation, a comprehensive inspection and commissioning of the entire hydraulic system should be carried out. Ensure that the filter is installed correctly, connected tightly, and functioning properly. At the same time, the cleanliness of the hydraulic system oil should be checked to ensure that it meets the usage requirements.
The installation method of TF series oil suction filters mainly includes position selection, fixed installation, installation of oil suction cylinder, connection of pipelines, installation of self sealing valves and other devices, as well as inspection and debugging steps. The correct execution of these steps is crucial for ensuring the normal operation of the filter and the stable operation of the hydraulic system.